DIY ribbon storage shelf organizer - FINISHED! CRAFT ROOM wall holder/display/rack organization idea - How to make tutorial

FINALLY FINISHED!!!! {{happy dance}}

I started this project 10 months ago and would work on it between a million other crafts. At some point I stuck it in the corner behind a door and basically forgot about it. 

I would remember why I started when I had to dig through numerous boxes of tangled ribbon. 

I originally had all my ribbon on this display holder I made in 2012.  

Why it didn't work: I'm lazy. 

When I finished a roll of ribbon I didn't want to take the entire row down and remove all the empty spools. What ended up happening was the entire organizer was empty spools and I was too lazy to put the new ones on. 

I also found that I used & wasted ribbon. Just pulled a bunch and cut to make sure I had enough to use but then I usually had a lot of excess. :/

 I decided to make it all wrapping paper instead and I love it!!! 

I just wanted to pick up the ribbon and put it back. This way I could use only what I needed.

I found all the materials at Home Depot. 

I actually started planning this project in February of 2018!!! Photos are from February. By the time I finally bought the supplies the prices had gone up. 

I loved them all!!! 

Almost bought these but thought they would be perfect for another project. 

I ended up getting the White True Bead Panel. 

Since I don't have my own saw {{on my wish list}} I was at the mercy of other people/place.

The Home Depot saw was constantly out of order and part of the reason it took so long to purchase.  :(

I'm sure prices are even higher now since I took these photos when I purchased in September last year.

Finally working and I had them cut the board down to fit my space. 

The price had also gone up from 88 cents to 94 cents. Per foot price so it was the most expensive part of the project. 

I also had them cut all the molding to size for me and had a small issue because I went back a few times and each person would cut the pieces a little differently. I ended up using the widest piece and adjusting the smaller pieces in place. I ended up making it work but some rows have a small gap at the end. 

Placed everything together on the floor to get an idea for spacing. 

I spray painted the inside of the molding for only the first several rows. The higher the shelf the less I could see. :) 

I used a few rolls to figure out spacing and marked placement with a pencil. 

I attached shelves on the side and in the back. 

I'm obviously not the best with a hammer but the marks wiped off.

I made the spacing a little larger than the ribbon so I could also store deco mesh and larger spools. 

My helper and craft room mascot. He's in there all the time. Might have something to do with the treats or maybe he just loves hearing me talk about crafts.

Each row was checked with the level.

My husband added anchors to the wall and attached with large screws at the bottom and top.

8' x 2' with 18 rows!

I absolutely love it!

You might also like:

DIY Wrapping Paper Holder

Craft room storage tags ((free downloads))

Thank you for visiting my blog. Any questions? Just ask! 

Follow me!

Instagram, Facebook, Pinterest

Cool arm CAST TATTOO - Broken bones are no fun but CASTTOO makes it a little better - decorate

So my youngest broke his arm just above his wrist in two places. :( Basketball game block that ended in a break. Both kids went up and both kids came down, BUT the other kids foot came down on my son's arm. OUCH! He even tried to go back in the game but the first pass he caught we knew he was done. He still keeps saying, "I blocked him like a beast and it was all ball!" Me: Oookay {{with my not impressed face}} :)

This was on Sunday morning (1st of two games) so it looked like the emergency room here we come, except my husband found a company called Direct Orthopedic Care. They took x-rays and cast on in a little over an hour. No splint, no missing work the next day for another doctor visit....in and out really fast! They will bill the insurance but since they have you pay up front and you fight the insurance if they don't pay, that's how they keep costs low. Still expensive but just a little less expensive.

VIDEO TUTORIAL HERE

Okay, cast is on so lets make this bad situation a little better. I searched for cool ideas or designs and found Casttoo. Seemed pretty easy and inexpensive for something you'll wear for 6 weeks. Ordering was a little tricky. I wasn't sure about size so we went with the small since it was cheaper.

They arrived fast and even sent some cool extras.
I love the skull and crossbones with the broken bone. :)

The size was great and glad we ordered the small.

Troy was super excited and wanted to apply right away!

Cut apart tattoos

You just need a hairdryer to apply

We talked about placement to make sure they would all fit. We ended up not using the giant basketball but used all the rest. Peel, place, and press down tattoo. Heat and press again. DONE!

He thought the hairdryer felt good. We did this for each tattoo individually.

Done in about 15 mins. We even put some on the other side.

Love how they turned out. He was so happy!

ITCHY CAST? or WET CAST?

Cast hack :) I'm sure every doctor would advise against this so my disclaimer is I'm NOT a doctor and I DON'T suggest you try anything we did.

With that said, this started when my son got his cast wet. We bought a rubber arm sleeve but somehow he didn't close the plug. We wanted to soak up as much water as possible and keep something between his skin and the cast to prevent infection. ANYTHING not to replace the cast since it was only on for three days. UGH! In the process we found it not only worked perfectly, but it was a great way to get to itchy spots. One happy boy and one happy Mama that the cast dried. Whew!

I found a t-shirt that was super soft and going to be donated.

Cut t-shirt into strips. I made several not knowing how much they would soak up.

I tried a few things and thought about it for a while and came up with something strong enough, thin enough, and long enough.....zip tie!!

I cut the end off and decided to attach with packing tape. I tried to put most of the tape on one side and that would slide along the inside of the cast and a tiny strip at the end on both sides to help hold the zip tie in place.

We started at one end and gently worked it to the end. Surprisingly this was super easy. It didn't catch on the inside padding.

Then we pulled the zip tie until the tape end was close enough to tuck the edges under the padding and gently pulled.

 I did it slowly not to hurt him since the cast is on sooooo tight. Worked perfect.

Remove tape 

You should have material sticking out of both sides of the cast

Now just grab both ends and pull once side a little and pull the other side. It's a back and forth motion.

 His face was instant relief. Remember, he just got it wet and we were trying to dry it as well. 

I trimmed the edges and tucked the ends inside the edge of the cast so you couldn't see the material. PLUS he wanted me to hide the HEARTS. Lol! It was a t-shirt going to be donate and it was super super soft. 

 I made two, one for the top of his arm and one for the bottom of his arm. We left it over night and removed in the morning. It was damp so we made two more. The next two we ended up moving back and forth when he had an itch and it was dry when we took it out.

It was a great alternative to him wanting to stick stuff in his cast to itch every hour. :)

Thank you for stopping by!